XPR Electrode 420258 for 170A Plasma Cutting
XPR Electrode 420258 is a compatible replacement electrode for selected 170A XPR plasma cutting configurations. Used in specified O₂/Air mild steel and Air/Air non-ferrous cutting processes, this electrode works with the corresponding nozzle, swirl ring, shield, and water tube for industrial plasma torch maintenance.
XPR Electrode 420258 Replacement for 170A Plasma Systems
The XPR Electrode 420258 is a compatible replacement plasma consumable designed for selected 170A XPR cutting applications. It is listed for both O₂/Air mild steel cutting and Air/Air non-ferrous cutting configurations. Although both applications use the same electrode part number, their associated consumables differ according to the cutting process.
The electrode is a key component of the plasma torch assembly. It participates in establishing the electrical arc used to cut metal and is exposed to intense heat and electrical wear during operation. Inspecting the electrode and replacing it according to the equipment manufacturer’s maintenance instructions helps maintain the condition of the torch consumable assembly.
For correct replacement, the electrode should be matched with the specified nozzle, swirl ring, and shield. In the 170A O₂/Air mild steel configuration, electrode 420258 is used with nozzle 420261 and swirl ring 420260. In the 170A Air/Air non-ferrous configuration, it is used with nozzle 420524 and the same swirl ring 420260. Always confirm the complete consumable stack against the applicable cutting chart before ordering.
Key Features
- Part Number: 420258 compatible replacement plasma electrode.
- Rated Configuration: Selected 170A XPR plasma cutting applications.
- Mild Steel Process: Specified O₂/Air configuration.
- Non-Ferrous Process: Specified Air/Air configuration.
- Consumable Matching: Designed for use with the correct nozzle, swirl ring, shield, and water tube.

Product Specifications
| Item | Specification |
|---|---|
| Product Name | XPR Electrode |
| Part Number | 420258 |
| Product Type | Plasma torch electrode |
| Compatible System Series | XPR170 / compatible XPR configurations |
| Applicable Current | 170A |
| Mild Steel Process | O₂/Air |
| Non-Ferrous Process | Air/Air |
| O₂/Air Nozzle | 420261 |
| Air/Air Nozzle | 420524 |
| Swirl Ring | 420260 |
| O₂/Air Shield | 420513 |
| Air/Air Shield | 420513 |
| Nozzle Retaining Cap | 420365 |
| Shield Retaining Cap | 420200 |
| Water Tube | 420368 |
| Product Type | Compatible replacement consumable |
Compatibility note: These specifications refer to the listed 170A configurations. Verify the plasma system, gas process, and full consumable assembly against the applicable equipment documentation before ordering.
Compatible Consumable Configurations
The following examples show the specified consumable combinations for electrode 420258.
| Cutting Application | Shield | Nozzle | Swirl Ring | Electrode | Water Tube |
|---|---|---|---|---|---|
| 170A O₂/Air mild steel | 420513 | 420261 | 420260 | 420258 | 420368 |
| 170A Air/Air non-ferrous | 420513 | 420524 | 420260 | 420258 | 420368 |
Both configurations use shield retaining cap 420200 and nozzle retaining cap 420365. The nozzle differs by cutting process, so the consumable assembly should not be selected by amperage alone.

Difference Between Electrode 420258 and Electrode 420356
Electrodes 420258 and 420356 belong to different XPR consumable configurations.
| Comparison | 420258 | 420356 |
|---|---|---|
| Applicable Configuration | Selected 170A processes | Selected 130A, 170A, and 300A non-ferrous processes |
| Example Process | O₂/Air mild steel; Air/Air non-ferrous | Selected N₂/N₂, H₂-Ar-N₂/N₂, and N₂/H₂O |
| Example 170A Nozzle | 420261 or 420524, depending on process | 420324 for specified non-ferrous processes |
| Matching Swirl Ring | 420260 | 420314 or 420323, depending on process |
These electrodes are not interchangeable simply because both may appear in 170A applications. Their intended process and complete consumable configuration must match the equipment setup.
Applications of XPR Electrode 420258
The XPR Electrode 420258 is intended for compatible mechanized plasma cutting operations using specified 170A processes. Applications include mild steel cutting with the approved O₂/Air configuration and non-ferrous cutting with the approved Air/Air configuration.
Metal fabrication workshops, industrial manufacturing facilities, and production cutting lines can include this electrode in planned consumable maintenance and spare-parts inventory. Keeping the electrode part number linked to its corresponding nozzle and swirl ring helps maintenance and purchasing teams avoid mixing components intended for different processes.
Inspect the electrode and associated torch components according to the equipment manufacturer’s maintenance procedures. Replace worn or damaged consumables when required, and follow all relevant safety instructions when servicing plasma cutting equipment.
Compatible Replacement Consumables from ALLWIN
ALLWIN supplies compatible replacement plasma consumables for industrial cutting applications. When sourcing the XPR Electrode 420258, verify the required current, gas process, nozzle part number, and other matching components to ensure the electrode is appropriate for the intended torch assembly.
Browse the XPR170 and XPR300 plasma consumables collection for related replacement components, or visit the ALLWIN website.
For information about industrial cutting equipment, explore FWincnc CNC plasma cutting machines.
Product Disclaimer: This product is offered as a compatible replacement consumable. Hypertherm and XPR are referenced solely to identify compatible equipment and applications. This listing does not imply that the product is manufactured, sponsored, or certified by Hypertherm.


